Compare Products

Hide

Clear All

VS

RG-MAP852(V3) Sem fio - 1
RG-MAP852(V3) Sem fio - 2
RG-MAP852(V3) Sem fio - 3
RG-MAP852(V3) Sem fio - 4
RG-MAP852(V3) Sem fio - 5
RG-MAP852(V3) Sem fio - 1
RG-MAP852(V3) Sem fio - 2
RG-MAP852(V3) Sem fio - 3
RG-MAP852(V3) Sem fio - 4
RG-MAP852(V3) Sem fio - 5
Picture

RG-MAP852(V3), i-Share+ Solution Micro AP, Wi-Fi 6 Dual-Radio 2.976 Gbps

Recommended for complex environments, such as wireless dormitory networks, hotels, and dense office networks.

Models
Series
Highlight Features
  • 4 x 1 Gbps downlink Ethernet ports,  wired and wireless integration for cost-efficient networking
  • 2.976 Gbps ultra-fast speed with Wi-Fi 6
  • PoE protocols supported, no local power is required
  • Unified WIS cloud management, intelligent O&M
Sales Enquiry
Key Specification View More
Features

The RG-AM5532 is an i-Share access point (AP) released by Ruijie Networks for complex application environments, such as wireless dormitory networks, hotels, and dense office networks.

The RG-AM5532 supports three modes for data uplink: four optical ports, four electrical ports, and two optical ports and two electrical ports. The uplink electrical ports can be connected to four IEEE 802.3af-compliant powered devices (PDs), two IEEE 802.3at-compliant PDs, or two IEEE 802.3af-compliant PDs and one IEEE 802.3at-compliant PD, to support standard PoE APs.

Based on the IEEE 802.11ax standard, one RG-AM5532 can extend to connect to 24 radio modules that provide two spatial streams at dual bands for each of 24 rooms. Each room can enjoy up to 2.976 Gbps bandwidth, meeting requirements in high-performance access scenarios, such as dormitory networks.

The RG-AM5532 design considers wireless network security, radio control, mobile access, and quality of service (QoS) guarantee, seamless roaming, and other factors to implement data forwarding, security, and access control of wireless users.

Specifications

Micro AP Product Specifications

Dimensions and Weight

RG-MAP852(V3)

Unit dimensions(W x D x H)

125 mm × 86 mm × 30 mm (4.92 in x 3.38 in x 1.18 in)

Shipping dimensions(W x D x H)

180 mm x 137 mm x 52 mm (7.09 in x 5.39 in x 2.05 in)

Unit weight

0.31 kg (0.68 lbs)

Shipping weight

0.35 kg (0.77 lbs)

Mounting

Wall/Ceiling/In-wall-mount



Wi-Fi Radio

RG-MAP852(V3)

Radio design

Dual-radio, four spatial streams per device

Radio 1: 2.4 GHz, 2 spatial streams: 2x2, MU-MIMO

Radio 2: 5 GHz, 2 spatial streams: 2x2, MU-MIMO

Operating frequencies

Radio 1, 802.11b/g/n/ax:

●     2.400 GHz to 2.4835 GHz, channels 1 to 13

Radio 2, 802.11a/n/ac/ax:

●     5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48

●     5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64

●     5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140

●     5.725 GHz to 5.850 GHz (HE80), U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Note: Country-specific restrictions apply.

Date rates

Combined peak data rate: 2.976 Gbps

Radio1: 2.4GHz, 574Mbps

●     Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client device (max.)

●     Two spatial stream SU MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client device (typical)

Radio2: 5GHz, 2.402Gbps

●     Two spatial stream Single SU MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client device (max.)

●     Two spatial stream SU MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client device (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz

●     802.11b: 1, 2, 5.5, 11

●     802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24 ,36, 48, 54

●     802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

●     802.11ac: 6.5 to 400 (MCS0 to MCS9, NSS = 1 to 2,VHT20 to VHT40)

●     802.11ax:  8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz

●     802.11a: 6, 9, 12, 18, 24, 36, 48, 54

●     802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

●     802.11ac: 6.5 to 1732 (MCS0 to MCS9, NSS = 1 to 2,VHT20 to VHT160)

●     802.11ax: 8.6 to 2402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)

Packet aggregation

802.11n/ac/ax: A-MPDU, A-MSDU

Antenna type

Build-in ominidirectional antenna (2 x 2.4 GHz antennas, 2 x 5 GHz antennas)

Antenna gain

2.4GHz: 2dBi

5GHz: 2dBi

Max. transmit power

2.4 GHz radio: 21 dBm (18 dBm per chain)

5 GHz radio: 21 dBm (18 dBm per chain)

Note: The transmit power is limited by local regulatory requirements.

Power increment

Configurable in increments of 1 dBm or in percentage (recommended)

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM,

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM



The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Wi-Fi Radio Frequency Performance

RG-MAP852(V3)

Frequency Band and Protocol

Data Rate

Max. Transmit Power per Transmit Chain

Max. Receive Sensitivity per Receive Chain

2.4GHz 802.11b

1 Mbps

18 dBm

–91 dBm

2 Mbps

17 dBm

–91 dBm

5.5 Mbps

16 dBm

–90 dBm

11 Mbps

15 dBm

–87 dBm

2.4GHz 802.11g

6 Mbps

18 dBm

–89 dBm

24 Mbps

16 dBm

–82 dBm

36 Mbps

16 dBm

–78 dBm

54 Mbps

15 dBm

–72 dBm

2.4GHz 802.11n (HT20)

MCS0

18 dBm

–85 dBm

MCS7

15 dBm

–67 dBm

2.4GHz 802.11n (HT40)

MCS0

18 dBm

–82 dBm

MCS7

15 dBm

–64 dBm

2.4GHz 802.11ax (HE20)

MCS0

18 dBm

–85 dBm

MCS11

12 dBm

–58 dBm

2.4GHz 802.11ax (HE40)

MCS0

18 dBm

–82 dBm

MCS11

12 dBm

–54 dBm

5GHz 802.11a

6 Mbps

18 dBm

–89 dBm

24 Mbps

16 dBm

–82 dBm

36 Mbps

16 dBm

–78 dBm

54 Mbps

15 dBm

–72 dBm

5GHz 802.11n (HT20)

MCS0

18 dBm

–85 dBm

MCS7

15 dBm

–67 dBm

5GHz 802.11n (HT40)

MCS0

18 dBm

–82 dBm

MCS7

15 dBm

–64 dBm

5GHz 802.11ac (VHT20)

MCS0

18 dBm

–85 dBm

MCS9

15 dBm

–60 dBm

5GHz 802.11ac (VHT40)

MCS0

18 dBm

–82 dBm

MCS9

15 dBm

–57 dBm

5GHz 802.11ac (VHT80)

MCS0

18 dBm

–79 dBm

MCS9

15 dBm

–53 dBm

5GHz 802.11ax (HE20)

MCS0

18 dBm

–85 dBm

MCS11

12 dBm

–58 dBm

5GHz 802.11ax (HE40)

MCS0

18 dBm

–82 dBm

MCS11

12 dBm

–54 dBm

5GHz 802.11ax (HE80)

MCS0

18 dBm

–79 dBm

MCS11

12 dBm

–52 dBm

5GHz 802.11ax (HE160)

MCS0

16 dBm

–75 dBm

MCS11

9 dBm

–47 dBm



Port Specifications

RG-MAP852(V3)

Fixed service port

Uplink: One 10/100/1000Base-T Ethernet port with auto-negotiation, supporting IEEE 802.3af/at/bt-compliant PoE

Downlink: Four 10/100/1000Base-T Ethernet ports with auto-negotiation

Fixed management port

1 x RJ45 console port (serial console port)

Status LED

1 x multi-color system status LED

Button

1 x Reset button

●     Press the button for shorter than 2 seconds. Then the device restarts.

●     Press the button for longer than 5 seconds. Then the device restores to factory settings.



Power Supply and Consumption

RG-MAP852(V3)

Input power supply

PoE/PoE+/PoE++ (IEEE 802.3af/at/bt-compliant), powered by an i-Share+ master AP

Max. power consumption

9 W



Environment and Reliability

RG-MAP852(V3)

Temperature

Operating temperature: –10°C to +45°C (14°F to 113°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude between 3,000 m (9,843 ft) and 5,000 m (16,404 ft), every time the altitude increases by 167 m (548 ft), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity: 5% RH to 95% RH (non-condensing)

Storage humidity: 5% RH to 95% RH (non-condensing)

Environment standard

Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)



Certifications and Regulatory Compliance

RG-MAP852(V3)

Regulatory compliance

EN 55032

EN 55035

EN 61000-3-3

EN IEC 61000-3-2

EN 301 489-1

EN 301 489-3

EN 301 489-17

EN 300 328

EN 301 893

EN 300 440

FCC Part 15

EN IEC 62311

IEC 62368-1

EN 62368-1

* For more country-specific regulatory information and approvals, contact your local sales agency.

 

Software Specification

Software

RG-MAP852(V3)

Applicable software version

RGOS11.9(6)W2B5 or higher



WLAN

RG-MAP852(V3)

Max. number of associated STAs

1,024 (up to 512 STAs per radio)

Max. number of BSSIDs

16 (up to 8 BSSIDs per radio)

Max. number of WLAN IDs

8

STA management

SSID hiding

Band steering

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.

Intelligent load balancing based on the STA quantity or traffic

Rate set settings

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

CAPWAP

IPv4 / IPv6 CAPWAP

CAPWAP through NAT

MTU setting and fragmentation over CAPWAP tunnels

Encryption over CAPWAP data channels

Data forwarding

Centralized and local forwarding

Wireless roaming

Layer 2 and Layer 3 roaming

Wireless locating

MU and TAG device locating



Security and Authentication

RG-MAP852(V3)

Authentication and encryption

PSK and web authentication

QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication

Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES)

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist

WIDS

Wireless Intrusion Detection System(WIDS)

User isolation

Rogue AP detection and containment

ACL

Dynamic ACL assignment based on 802.1X authentication

MAC extended ACLACL based on a Layer 2 interface

ACL based on a Layer 3 interface

Ingress ACL based on a wireless interface

CPP

CPU Protect Policy (CPP)

NFPP

Network Foundation Protection Policy (NFPP)



Routing and Switching

RG-MAP852(V3)

MAC

Static and filtered MAC addresses

MAC address table size: 1,024

Max. number of static MAC addresses: 1,024

Max. number of filtered MAC addresses: 1,024

Ethernet

Jumbo frame length: 1518

Full-duplex and half-duplex modes of interfaces

IEEE802.1p and IEEE802.1Q

Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP)

VLAN

Interface-based VLAN assignment

Max. number of VLANs: 4094

VLAN ID range: 1–4094

ARP

ARP entry aging and proxy ARP

Max. number of ARP entries: 1,024

ARP check

IPv4 services

Static and dynamic IPv4 addresses

IPv6 services

IPv6 addressing, ND, ICMPv6, IPv6 ping

IP routing

IPv4/IPv6 static routing

Max. number of static IPv4 routes: 1,024

Max. number of static IPv6 routes: 1,000

Multicast

Multicast-to-unicast conversion



Network Management and Monitoring

RG-MAP852(V3)

Network management

SNMPv1/v2C/v3

Fault detection and alarm

Information statistics and logging

Network management platform

Web management (Eweb)

User access management

Telnet andTFTP

Show More
Resources All Resources
Learn about Products or Solutions
Software and Configuration
Order Information

Order the RG-AM5532 (i-Share+ solution master AP) first. Then order the RG-MAP852(V3) (i-Share+ solution micro AP).

Model

Description

RG-AM5532

The master AP of the i-Share+ solution APs with 24 downlink 1000 Mbps PoE ports, four uplink 1000 Mbps PoE electrical ports and four uplink 10GE SFP+ ports in auto negotiation mode. The uplink ports support three mutually exclusive modes: two 1000 Mbps electrical ports and two 10GE optical ports (supporting up to two settled APs), four 1000 Mbps electrical ports (supporting up to three settled APs) and four 10GE optical ports (not supporting settled APs). The master AP supports up to 24 i-Share micro APs. Each master AP uses four wireless controller licenses.

RG-MAP852(V3)

A universal Wi-Fi 6 dual-radio i-Share micro AP. The AP supports up to four spatial streams and the maximum access rate of 2.976 Gbps. It complies with IEEE 802.11b/g/n/ax and IEEE 802.11a/n/ac/ax standards. The AP provides one 1000 Mbps uplink port and four 1000 Mbps downlink ports. The AP can be can be mounted on a wall, ceiling, or junction box.

Show More
Perguntas frequentes Ask a Question
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Fale conosco

Fale conosco

How can we help you?

Fale conosco

Get an Order help

Fale conosco

Get a tech support

2024 Ruijie Networks Brand Awareness Survey

Your opinions and feelings are crucial for our improvement.

Fill in the survey