Picture

RG-S6120-48XMG4VS2QXS-UP-H 48-Port 10G Managed Multi-GE Access Switches with 40G Uplink Ports

10G/5G/2.5G/1G/100M access, PoE/PoE+/PoE++, 4 x 25G and 2 x 40G uplink optical ports, offering flexible networking options to build high-performance campus networks

Models

RG-S6110-24MG4VS-UP

24 x 5G electrical ports, 4 x 25G optical ports

RG-S6110-48MG4VS2QXS-UP

48 x 5G electrical ports, 4 x 25G optical ports, 2 x 40G optical ports

RG-S6120-24XMG4XS4VS-UP-H

24 x 10G electrical ports, 4 x 10G optical ports, 4 x 25G optical ports

RG-S6120-48XMG4VS2QXS-UP-H

48 x 10G electrical ports, 4 x 25G optical ports, 2 x 40G optical ports

Series

RG-S6100 Series Multi-GE Switches

Sales Enquiry

Highlight Features

48 x 10G/5G/2.5G/1G/100M Base-T Ethernet ports and 4 x 25G and 2 x 40G uplink ports, meeting high bandwidth demands of large campuses
Multi-level hardware protection, ensuring continuous device operation and stable network connectivity
VSU, delivering flexible networking capabilities and high performance
Multiple network security policies and real-time monitoring, ensuring consistently high network performance
Intelligent fan speed adjustment and auto port sleeping, reducing power consumption and noises
Various network management methods, achieving simplified network maintenance

Features
Specifications
Order Information
Perguntas frequentes

Sales Enquiry

Features

RG-S6120-48XMG4VS2QXS-UP-H 10G Multi-GE Switches

Forty-eight service ports support 10G/5G/2.5G/1G/100M access and four 25G and two 40G uplink optical ports are provided to realize flexible networking.
High-power PoE++ is provided and a maximum of 90 W PoE power supply meets different end-use needs.

Hardware Redundancy, Guaranteed Service Continuity and Network Connectivity

Hardware-Level Boot Redundancy

Optical Port Fault Isolation

Hot-Swappable Power Modules + Intelligent Fan Modules

Two Flash chips are used to store the system Boot program for hardware-level Boot redundancy, avoiding device failure caused by a failed Flash chip.

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

Connected by an aggregate link, the VSU virtual system and peripherals switch links in milliseconds to ensure service continuity in case of a failure.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

Intelligent Speed Regulation and Auto Sleeping, Reducing Energy Consumption and Noise

Intelligent fan speed regulation based on monitored component temperatures, saving energy
Auto service port sleeping, reducing device power consumption.

Managed by the INC Controller to Achieve Easy and Efficient O&M Management

The switch automatically completes registration and configuration after it accesses the all-optical network, achieving plug and play, no commissioning and fast onboarding.

You can check the link health status, handle alarms and troubleshoot faults through the INC, which dramatically improves the O&M efficiency.

A switch can be flexibly replaced based on service needs without reconfiguration. Service ports supports auto-sensing, achieving automatic O&M.

Fast Onboarding

Optical Link O&M

Zero Touch Replacement

Specifications

Hardware Specifications

Hardware Specifications	RG-S6110-24MG4VS-UP	RG-S6110-48MG4VS2QXS-UP	RG-S6120-24XMG4XS4VS-UP-H	RG-S6120-48XMG4VS2QXS-UP-H
Interface Specifications
Fixed port	24 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 ports Ports 1 to 24 support PoE/PoE+ and HPoE power supply (maximum output power of a HPoE-capable port: 90 W)	48 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 + 2 x 40GE QSFP+ ports Ports 1 to 48 support PoE/PoE+ power supply (ports 1 to 24 support HPoE power supply, maximum output power of a HPoE-capable port: 90 W)	24 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation 4 x 10GE SFP+ ports 4 x 25GE SFP28 ports Ports 1 to 24 support PoE/PoE+ and HPoE power supply (maximum output power of a HPoE-capable port: 90 W)	48 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 + 2 x 40GE QSFP+ ports Ports 1 to 48 support PoE/PoE+ power supply (ports 1 to 24 support HPoE power supply, maximum output power of a HPoE-capable port: 90 W)
Fan module	2 x fixed fan modules Fan speed regulating and fault alarms	3 x fan module slots Fan speed regulating and fault alarms	3 x fan module slots Fan speed regulating and fault alarms	3 x fan module slots Fan speed regulating and fault alarms
Power module	1 x built-in power module	2 x power module slots	2 x power module slots	2 x power module slots
Fixed management port	1 x MGMT port, 1 x console port, and 1 x USB2.0 port
System Specifications
Packet forwarding rate	327 Mpps	625 Mpps	565 Mpps	982 Mpps
System switching capacity	440 Gbps	840 Gbps	760 Gbps	1320 Gbps
Number of MAC addresses	Number of global MAC addresses: 32,768 Number of static MAC addresses: 1,000	Number of global MAC addresses: 32,768 Number of static MAC addresses: 1,000	Number of global MAC addresses: 32,768 Number of static MAC addresses: 1,000	Number of global MAC addresses: 32,768 Number of static MAC addresses: 1,000
ARP table size	16,000	16,000	16,000	16,000
ND table size	4,000	4,000	4,000	4,000
Number of IPv4 unicast routes	16,000	16,000	16,000	16,000
Number of IPv4 multicast routes	4,000	4,000	4,000	4,000
Number of IPv6 unicast routes	16,000	16,000	16,000	16,000
Number of IPv6 multicast routes	2,000	2,000	2,000	2,000
Number of IGMP groups	4,000
Number of MLD groups	1,000
Number of ACEs	Ingress: 2,500 Egress: 1,000
Number of VSU members	2	2	2	2
Dimensions and Weight
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)	442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)	442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)	442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)
Weight (chassis and fan modules)	3.65 kg (8.05 lbs)	6.11 kg (13.47 lbs)	6.11 kg (13.47 lbs)	6.11 kg (13.47 lbs)
CPU and Storage
CPU	1.2 GHz single-core processor	1.2 GHz single-core processor	1.2 GHz single-core processor	1.2 GHz single-core processor
Storage	1 GB DDR4 1 GB flash memory	2 GB DDR4 1 GB flash memory	1 GB DDR4 1 GB flash memory	2 GB DDR4 1 GB flash memory
Data packet buffer	4 MB	4 MB	4 MB	4 MB
Power and Consumption
Maximum power consumption	Without PoE: < 120 W Full PoE load: < 370 W	Without PoE: < 240 W Full PoE load: < 1,600 W	Without PoE: < 120 W Full PoE load: < 1,650 W	Without PoE: < 240 W Full PoE load: < 1,600 W
Maximum output power	Built-in power: 460 W (370 W for PoE output power supply and 90 W for the chassis)	RG-PA600I-P-F: 600 W (400 W/450 W for PoE output power supply and 150 W/200 W for the chassis) RG-PA1000I-P-F: 1,000 W (800 W/850 W for PoE output power supply and 150 W/200 W for the chassis)	RG-PA600I-P-F: 600 W (400 W/450 W for PoE output power supply and 150 W/200 W for the chassis) RG-PA1000I-P-F: 1,000 W (800 W/850 W for PoE output power supply and 150 W/200 W for the chassis)	RG-PA600I-P-F: 600 W (400 W/450 W for PoE output power supply and 150 W/200 W for the chassis) RG-PA1000I-P-F: 1,000 W (800 W/850 W for PoE output power supply and 150 W/200 W for the chassis)
Rated input voltage	AC input: 100 V AC to 240 V AC Frequency: 50/60 Hz Rated current per circuit: 6 A	RG-PA600I-P-F: ● AC input: 100 V AC to 240 V AC ● Frequency: 50/60 Hz ● Rated current per circuit: 8 A RG-PA1000I-P-F: ● AC input: 100 V AC to 240 V AC ● Frequency: 50/60 Hz ● Rated current per circuit: 8 A
Maximum input voltage	90 V AC to 264 V AC
Environment and Reliability
MTBF	22.18 years	27.02 years	22.18 years	27.02 years
Primary airflow	Front/Left-to-rear airflow	Front/Left-to-rear airflow	Front/Left-to-rear airflow	Front/Left-to-rear airflow
Operating temperature	0°C to 45°C (32°F to 113°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% to 90% RH (non-condensing)
Storage humidity	5% to 90% RH (non-condensing)
Operating altitude	–500 m to +3000 m (–1640.42 ft. to +9842.52 ft.)	–500 m to +3000 m (–1640.42 ft. to +9842.52 ft.)	–500 m to +3000 m (–1640.42 ft. to +9842.52 ft.)	–500 m to +3000 m (–1640.42 ft. to +9842.52 ft.)
Operating noise	Typical value: < 40 dBA@27°C (80.6°F) Maximum value < 78 dBA	Typical value: < 60 dBA@27°C (80.6°F) Maximum value < 78 dBA	Typical value: < 60 dBA@27°C (80.6°F) Maximum value < 78 dBA	Typical value: < 60 dBA@27°C (80.6°F) Maximum value < 78 dBA
Interface surge protection	6 kV

Software Specifications

RG-S6100 Series
Feature	Description
Ethernet switching	Jumbo frame (maximum length: 9,216 bytes)
	IEEE 802.1Q (supporting 4K VLANs)
	Maximum number of VLANs that can be created: 4,094
	Voice VLAN
	Super-VLAN and private VLAN
	MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment
	GVRP
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
	ERPS (G.8032)
	LACP (IEEE 802.3ad)
	LLDP/LLDP-MED
IP service	Static and dynamic ARP
	DHCP server, DHCP client, DHCP relay, and DHCP snooping
	DNS
	DHCPv6 server, DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
IP routing	Static routing
	RIP and RIPng
	OSPFv2 and OSPFv3
	GR
	IS-ISv4 and IS-ISv6
	BGP4 and BGP4+
	Equal and Weighted Cost Multi-Path (ECMP)
	Packet-based and flow-based load balancing
	Stateless Auto Configuration
	IPv4/IPv6 VRF
	IPv4/IPv6 PBR
Multicast	IGMPv1/v2/v3 and IGMP proxy
	IGMPv1/v2/v3 snooping
	IGMP filtering and IGMP fast leave
	PIM-DM, PIM-SM, and PIM-SSM
	PIM-SSM for IPv4 and IPv6
	MSDP to achieve inter-domain multicast
	MLDv1/v2
	MLD snooping
	MSDP
	PIM-SMv6
	Multicast source IP address check Multicast source port check
	Multicast querier
ACL and QoS	Standard IP ACLs (hardware ACLs based on IP addresses)
	Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)
	Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
	Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	Time-based ACLs
	ACL80 and IPv6 ACL
	Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL redirection
	Port traffic identification
	Port traffic rate limiting
	802.1p/DSCP/ToS traffic classification
	Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences
	Traffic classification based on ToS values
	Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	Eight queues on each port
	Rate limiting in each queue
Security	Multi-AAA
	RADIUS and TACAS+
	Filtering of invalid MAC addresses Broadcast storm suppression Hierarchical management of administrators and password protection BPDU guard
	RADIUS authentication and authorization
	Port- and MAC address-based 802.1x authentication
	IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication
	Web authentication
	Hypertext Transfer Protocol Secure (HTTPS)
	SSHv1 and SSHv2
	Global IP-MAC binding
	ICMPv6
	Port security
	IP source guard
	SAVI
	ARP spoofing prevention
	CPP and NFPP
	Various attack defense functions including NFPP, ARP anti-spoofing, DHCP/DHCPv6 attack defense, ICMP attack defense, ND attack defense, IP scanning attack defense, and customizing attack defense packet types
	Loose and strict RPF uRPF ignoring default routes
Reliability	REUP
	ERPS (G.8032)
	Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control
	Data Link Detection Protocol (DLDP)
	IPv4 VRRP v2/v3 and IPv6 VRRP
	BFD
	GR for RIP, OSPF, and BGP
	Power modules in 1+1 redundancy mode
	Hot swapping of power modules and fan modules (not supported by the RG-S6110-24MG4VS-UP)
Device virtualization	VSU
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFlow
	NTP and SNTP
	FTP and TFTP
	SNMP v1/v2/c3
	RMON (1, 2, 3, 9)
	Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups RMON used to implement Ethernet statistics, historical statistics, and alarm functions
	NETCONF
	Flow-based mirroring, and N:1 and 1:N port mirroring
	CWMP
	gRPC
	OpenFlow Special 1.3 Flow table analysis defined by all protocols Transmission of specified packets to the controller Configuring the controller's IP address and port Notifying port status changes to the controller
	CLI (Telnet/console), SSH, Syslog, SNMP over IPv6, Telnet v6, FTP/TFTP v6, DNS v6, and NTP for IPv6
	Ruijie Could-based management

Note: The item marked with the asterisk (*) will be available in the future.

Order Information

Follow the steps to order an RG-S6100 multi-GE switch:

Select a model of RG-S6100 series switches. The device is fully equipped with fan modules that do not need to be purchased separately.
Select power modules based on switch models. At least one power module is required.
Select optical modules based on optical interfaces of the switch.

Models marked with asterisks (*) in Ordering Information will be available in the future.

The switch, expansion module, power module, and other components can be ordered as needed. Before ordering an expansion module or power module, contact the online customer service personnel for the latest support information about the module.

Switches and Power Modules

Model	Description
RG-S6110-24MG4VS-UP	24 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 ports
RG-S6110-48MG4VS2QXS-UP	48 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 + 2 x 40GE QSFP+ ports
RG-S6120-24XMG4XS4VS-UP-H	24 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation 4 x 10GE SFP+ ports 4 x 25GE SFP28 ports
RG-S6120-48XMG4VS2QXS-UP-H	48 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 + 2 x 40GE QSFP+ ports
RG-PA600I-P-F	600 W AC power module
RG-PA1000I-P-F	1000 W AC power module
RG-PA150I-F	150 W AC power module

GE Optical Module

Model	Description
Mini-GBIC-GT	1000BASE-GT mini GBIC module
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, SM (850 nm, 500 m, LC).
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, SM (1310 nm, 10 km, LC)
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, SM (1310 nm, 40 km, LC)
MINI-GBIC-ZX80-SM1550	1000BASE-ZX80, SFP transceiver, SM (1550 nm, 80 km, LC)
GE-SFP-LX20-SM1310-BIDI	SFP BIDI Transceiver-TX1310/RX1550, 20 km, LC
GE-SFP-LX20-SM1550-BIDI	SFP BIDI Transceiver-TX1550/RX1310, 20 km, LC
GE-SFP-LH40-SM1310-BIDI	SFP BIDI Transceiver-TX1310/RX1550, 40 km, LC
GE-SFP-LH40-SM1550-BIDI	SFP BIDI Transceiver-TX1550/RX1310, 40 km, LC

10GE Optical Modules

Model	Description
XG-SFP-SR-MM850	10GE LC connector module, applicable to the SFP+ port 62.5 μm/125 μm: 33 m 50 μm/125 μm: 66 m Modal bandwidth of 2000 MHz·km for a link length of up to 300 meters
XG-SFP-LR-SM1310	10GE LC connector module with a link length of up to 40 km, 1310-nm wavelength, applicable to the SFP+ port
XG-SFP-ER-SM1550	10GE LC connector module with a link length of up to 40 km, 1550-nm wavelength, applicable to the SFP+ port
XG-SFP-AOC1M	10GE SFP+ port cable, 1 m, including one cable and two interface modules
XG-SFP-AOC3M	10GE SFP+ port cable, 3 m, including one cable and two interface modules
XG-SFP-AOC5M	10GE SFP+ port cable, 5 m, including one cable and two interface modules

25GE Optical Modules

Model	Description
VG-SFP-SR-MM850	25GE SR, SFP28, 850-nm wavelength, 100 m over MMF
VG-SFP-LR-SM1310	25GE LR, SFP28, 1310-nm wavelength, 10 km over SMF
VG-SFP-AOC5M	25GE SFP+ active optical cable, 5 m, including two modules

40GE Optical Modules

Model	Description
40G-QSFP-SR-MM850	40GE SR, QSFP+ transceiver, applicable to QSFP+ ports OM3 and OM4 MMF, MPO, 8-core, 850-nm wavelength, 100 m over OM3 MMF or 150 m over OM4 MMF
40G-QSFP-LR4 SM1310	40GE LR4, QSFP+ transceiver, LC, 1310-nm wavelength, 2-core, 10 km over SMF, applicable to QSFP+ ports
40G-AOC-5M	40GE QSFP+ active optical cable, 5 m, including one cable and two interface modules
40G-AOC-10M	40GE QSFP+ active optical cable, 10 m, including one cable and two interface modules

Perguntas frequentes Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution

RG-S6120-48XMG4VS2QXS-UP-H 48-Port 10G Managed Multi-GE Access Switches with 40G Uplink Ports

RG-S6120-48XMG4VS2QXS-UP-H 10G Multi-GE Switches

Forty-eight service ports support 10G/5G/2.5G/1G/100M access and four 25G and two 40G uplink optical ports are provided to realize flexible networking.
High-power PoE++ is provided and a maximum of 90 W PoE power supply meets different end-use needs.