Picture

RG-N18010-XH – Next Generation Data Center Network High-Density Centralized Modular Core Switch with 100GE/400GE Line Cards and Eight Service Slots

Adaptation to 400GE ZR/ZR+ optical modules, up to 288 x 400GE and 1152 x 100GE line-rate ports, and smooth evolution to 800GE

Models

RG-N18010-XH

Eight Service Slots, 100GE/400GE Line Cards

Series

RG-N18000-XH Series

Datasheet Sales Enquiry

Highlight Features

100GE and 400GE line cards, and up to 288 x 400GE and 1152 x 100GE line-rate ports
Communication at the maximum distance of 120 km and easy DCI
Hardware-level redundancy, ensuring nonstop services and data center network stability
MACsec data encryption and transmission, effectively protecting service data security
Innovative technology design and efficient heat dissipation, with more than 50,000 kWh saved per device each year
Telemetry-based network monitoring and automated O&M, making management simple and efficient

Key Specification
Features
Specifications
Resources
Order Information
Perguntas frequentes

Sales Enquiry

Key Specification View More

Features

Data Center 400GE Modular
Core Switch
RG-N18010-XH

The RG-N18010-XH provides 10 module
slots, including eight service slots, which can
be used with 100GE and 400GE line cards. It
supports 800GE line cards in the future,
easily coping with future bandwidth
expansion needs.
With various port types, the RG-N18010-XH
supports up to 288 x 400GE and 1152 x
100GE line-rate ports, and allows smooth
evolution to 800GE, satisfying requirements
in diversified scenarios of data center
networks.

Innovative Architecture Design,
Achieving Highly Efficient Data Transmission

Zero Midplane

Clos Architecture

Service line cards are directly connected to SFUs, without the use of the midplane. Data can directly reach the SFU, with a
short distance. This significantly reduces the transmission loss and achieves efficient data transmission.

Communication at the Maximum Distance of 120 KM and Easy DCI

400GE ZR/ZR+ optical modules are used for interconnection, reducing Optical Transport Units (OTUs) and helping a cloud or hyper-scale
data center network to adapt to growing high-bandwidth services

Hardware-level Redundancy,
Ensuring Nonstop Services and Data
Center Network Stability

SFUs in N+1 Redundancy Mode

SFUs use N+1 redundancy and work in load balancing
mode, ensuring nonstop services.

Power Modules in M+N Redundancy Mode

Ten hot-swappable power modules are available. When a
fault occurs, services are switched within seconds. Services
are not interrupted when a power module is replaced. The
switch provides different protection measures for links.

Fan Trays in 2+1 Redundancy Mode

Three hot-swappable fan trays are available. The speed of
fan modules can be intelligently adjusted, ensuring highly
efficient heat dissipation.

Supervisor Engin es in 1+1 Redundancy Mode

The 1+1 hot standby design ensure continuous operation of
the switch.

Innovative Technology Design and Highly Efficient Heat Dissipation

MACsec Data Encryption and Transmission,
Effectively Protecting Service Data Security

MACsec provides hardware-level data encryption. With MACsec and 802.1X configured, the switch can strictly identify and verify transmitted data.
With MACsec, the switch achieves interface-based secure line-rate transmission, effectively preventing data from being intercepted and obtained maliciously
and ensuring service data security.

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time,
making network management more efficient and accurate.

Specifications

Hardware Specifications

System Specifications	RG-N18010-XH
Switching Capacity	645 Tbps/1,935 Tbps
Packet Forwarding Rate	345,600 Mpps
Slots
Module Slots	10 (2 for supervisor modules)
Switch Fabric Module Slots	8
Fan module	Three fan module slots
Power module	Ten power module slots
Dimensions and Weight
Dimensions (W x D x H)	Without cable management brackets: 442 mm x 896 mm x 708 mm (17.40 in. x 35.28 in. x 27.87 in., 16 RU) With cable management brackets: 442 mm x 935 mm x 708 mm (17.40 in. x 36.81 in. x 27.87 in., 16 RU)
Weight	96.4 kg (212.53 lbs., including the fan)
Power Supply and Consumption
Power Supply	RG-PAH3000I-F: ● AC: 100 V AC to 176 V AC, power: 1,500 W ● AC: 176 V AC to 240 V AC, power: 3,000 W ● HVDC: 240 V DC to 380 V DC, power consumption: 3,000 W
Airflow direction	Front-to-rear
Maximum Power Consumption	18,760 W
Environment and Reliability
MTBF	312,683 hours
Operating Temperature	0ºC to 40ºC (32ºF to 104ºF)
Storage Temperature	–40ºC to +70ºC (–40ºF to +158ºF)
Operating Humidity	10% RH to 90% RH (non-condensing)
Storage humidity	5% to 95% RH (non-condensing)
Altitude	● Operating altitude for long-term working conditions: up to 5000 m (16404.20 ft.). At 1800 m (5905.51 ft.), the maximum operating temperature is 40°C (104°F). The maximum operating temperature decreases by 1°C (1.8°F) per 200 m (656.16 ft.) increase in altitude. ● Operating altitude: up to 5,000 m (16404.20 ft.) ● Storage altitude: up to 5,000 m (16404.20 ft.)

Software Specifications

Software Specifications	RG-N18010-XH
Traffic Analysis	sFlow IPFIX
Layer 2 Features	Jumbo frame IEEE 802.3ad (static link aggregation, LACP, cross-card link aggregation, cross-device link aggregation) IEEE 802.1Q STP, RSTP, MSTP GVRP QinQ LLDP Static MAC addresses, address filtering, and limit on the number of MAC addresses
IPv4 Features	Static routing, RIP, OSPF, IS-IS, and BGP4 VRRP ECMP Policy-based routing Manual tunnel and GRE tunnel
IPv6 Features	Static routing, OSPFv3, BGP4+, IS-ISv6, and MLDv1/v2 VRRPv3 ECMP Policy-based routing Path MTU Discovery Manual tunnel and GRE tunnel Pingv6, telnetv6, FTPv6, TFTPv6, DNSv6, ICMPv6
Multicast	IGMP v1/v2/v3 IGMP snooping IGMP proxy PIM-DM, PIM-SM, PIM-SSM, and other multicast routing protocols MLDv1, MLDv2 Multicast static routing Fast leave
MPLS	MPLS L3VPN MPLS LDP #SR MPLS (Segment Routing) #SR-TE
ACL	Standard, extended, and expert-level ACLs Global ACLs Ingress and egress ACLs IPv6 ACLs
QoS	Mapping of IEEE 802.1p, DSCP, and ToS priorities Priority marking/remarking Multiple queue scheduling mechanisms, including SP(PQ), DRR, SP(PQ) + DRR, WFQ, SP(PQ) + WFR, Congestion avoidance mechanisms such as RED and WRED ACL Ingress and egress rate limiting, CAR #MPLS QoS
Data center features	#SRv6 VXLAN bridge VXLAN gateway BGP-EVPN VXLAN VXLAN mapping IPv6 VXLAN over IPv4 MLAG
SDN	OpenFlow 1.3.
Reliability	Independent switch fabric modules and independent supervisor modules to implement thorough separation of the forwarding plane from the control plane 1+1 redundancy for supervisor modules N+1 redundancy for switch fabric modules N+M redundancy for power modules and fans Backplane-free design to avoid single point of failures Hot swapping of components Hot patch function and online installation of patches BPDU Guard/Loop Guard/Root Guard NSR DLDP FRR GR for OSPF/IS-IS/BGP BFD for VRRP/OSPF/BGP4/ISIS/ISISv6/static routing
Device virtualization	Virtual Switching Unit 3.0
Security	MACSec Network Foundation Protection Policy (NFPP) and CPU protection policy (CPP) to prevent protocol packet attacks Prevention against DDoS, ARP, and ICMP attacks DAI, port security, IP source guard, and port protection uRPF RADIUS and TACACS user login authentication, password security, hierarchical user management, and password protection Source IP address restriction Function of not sending unknown multicast packets to the CPU Suppression of unknown multicast, unknown broadcast, and unknown multicast packets SSHv2, providing encrypted security channels for user login Prevention against MAC address flapping Plaintext and MD5 ciphertext authentication for OSPF, RIPv2, and BGP4 packets
Management	Console/AUX Modem/Telnet/SSH2.0 CLI configuration FTP, TFTP, Xmodem, and SFTP SNMP V1/V2c/V3 NETCONF RMON NTP clock Fault alarm and auto-recovery System operation logging Traffic analysis Zero-touch provisioning (ZTP) Reliable network service (RNS), which probes specific services provided by the peer device to monitor the service availability Telemetry Buffer status monitoring and traffic microburst identification Port mirroring, traffic mirroring, and ERSPAN Physical ports on all line cards support the routing mode and IP addresses can be configured independently. Monitoring of fan modules and power modules

* indicates that the feature will be available in the future.

# indicates that the feature is supported by only CE cards.

Safety and Regulatory Compliance

Specifications	RG-N18010-XH
Safety	● IEC 62368-1 ● EN IEC 62368-1 ● GB 4943.1
Electromagnetic Compatibility (EMC)	● EN 55032 ● EN 55035 ● EN IEC 61000-3-2 ● EN 61000-3-3 ● EN 300 386 V2.2.1 ● GB/T 9254.1
Environment	● 2011/65/EU EN 50581 ● 2012/19/EU EN 50419 ● (EC) No.1907/2006 ● GB/T 26572

*For more country-specific regulatory information and approvals, contact your local sales agency.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Order Information

Chassis and Supervisor Modules

Model	Description
RG-N18010-XH	RG-N18010-XH chassis, excluding power modules, with all fans
M18000XH-CM	M18000XH-CM supervisor module

Power Modules

Model	Description
RG-PAH3000I-F	3000 W AC power module (AC and 240 V to 380 V HVDC)

Switch Fabric Modules

Model	Description
M18018XH-FE-E IV	Type-E switch fabric module II for RG-N18010-XH, used together with CE cards
M18010XH-FE-E II	Type-E switch fabric module II for RG-N18010-XH, used together with CE cards

Line Cards

Model	Description
M18000XH-36QC-CES	Line card with 36 x 400GE QSFP-DD ports, used together with Type-E switch fabric modules
M18000XH-48CQ-CES	Line card with 48 x 100GE QSFP28 ports, used together with Type-E switch fabric modules

400GBASE Series Optical Transceivers

Model	Description
400G-QDD-DR4-SM1310	400G DR4 transceiver, QSFP-DD form factor, MPO-12 APC, 1310 nm, 500 m (1,640.42 ft.) over SMF
400G-QDD-FR4-SM1310	400G FR4 transceiver, QSFP-DD form factor, Duplex LC, 1310 nm, 2 km (6,561.68 ft.) over SMF
400G-QDD-ZR-SM1550	400G ZR transceiver, QSFP-DD form factor, Duplex LC, 1550 nm, 80 km (262,467.19 ft.) over SMF
400G-QDD-ZR+-SM1550	400G ZR+ transceiver, QSFP-DD form factor, Duplex LC, tunable wavelength, P2P distance of up to 120 km (393,700.79 ft.) over SMF
400G-QDD-SR8-MM850	400G SR8 module, QSFP-DD form factor, MPO-16 APC, 850 nm, 100 m (328.08 ft.) over MMF

100GBASE Series Optical Transceivers

Model	Description
100G-QSFP-LR4-SM1310	100G LR4 transceiver, QSFP28 form factor, Duplex LC, 1310 nm, 10 km (32,808.40 ft.) over SMF
100G-QSFP-iLR4-SM1310	100G iLR4 transceiver, QSFP28 form factor, Duplex LC, 1310 nm, 2 km (6,561.68 ft.) over SMF
100G-QSFP-ER4-SM1310	100G ER4 transceiver, QSFP28 form factor, Duplex LC, 1310 nm, 40 km (131,233.59 ft.) over SMF
100G-QSFP-SR-MM850	100G SR transceiver, QSFP28 form factor, MPO, 850 nm, 100 m (328.08 ft.) over MMF
100G-AOC-5M	100G AOC cable, QSFP28 form factor, 5 m (16.40 ft.)
100G-AOC-10M	100G AOC cable, QSFP28 form factor, 10 m (32.81 ft.)

40GBASE Series Optical Transceivers

Model	Description
40G-QSFP-LX4-SM1310	40G LX4 transceiver, QSFP+ form factor, Duplex LC connector, 150 m (492.13 ft.) over OM3/OM4 MMF, or 2 km (6,561.68 ft.) over SMF
40G-QSFP-LR4-SM1310	40G LR4 transceiver, QSFP+ form factor, Duplex LC, 10 km (32,808.40 ft.) over SMF
40G-QSFP-iLR4-SM1310	40G iLR4 transceiver, QSFP+ form factor, Duplex LC, 2 km (6,561.68 ft.) over SMF
40G-QSFP-LSR-MM850	40G LSR transceiver, QSFP+ form factor, MPO, 400 m (1,312.34 ft.) over MMF
40G-QSFP-SR-MM850	40G SR transceiver, QSFP+ form factor, MPO, 150 m (492.13 ft.) over MMF
40G-AOC-30M	40G AOC cable, QSFP+ form factor, 30 m (98.43 ft.)
40G-AOC-5M	40G AOC cable, QSFP+ form factor, 5 m (16.40 ft.)

25GBASE Series Optical Transceivers

Model	Description
VG-SFP-AOC5M	25G AOC cable, SFP28 form factor, 5 m (16.40 ft.)
VG-SFP-SR-SM850	25G SR transceiver, SFP28 form factor, LC, 850 nm, 100 m (328.08 ft.) over MMF
VG-SFP-LR-SM1310	25G LR4 transceiver, QSFP28 form factor, LC, 1310 nm, 10 km (32,808.40 ft.) over SMF

Perguntas frequentes Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution

RG-N18010-XH – Next Generation Data Center Network High-Density Centralized Modular Core Switch with 100GE/400GE Line Cards and Eight Service Slots

100GE and 400GE line cards, and up to 288 x 400GE and 1152 x 100GE line-rate ports

Communication at the maximum distance of 120 km and easy DCI

Hardware-level redundancy, ensuring nonstop services and data center network stability

MACsec data encryption and transmission, effectively protecting service data security

Innovative technology design and efficient heat dissipation, with more than 50,000 kWh saved per device each year

Telemetry-based network monitoring and automated O&M, making management simple and efficient

Data Center 400GE Modular
Core Switch
RG-N18010-XH

Innovative Architecture Design,
Achieving Highly Efficient Data Transmission

Zero Midplane

Clos Architecture

Communication at the Maximum Distance of 120 KM and Easy DCI

400GE ZR/ZR+ optical modules are used for interconnection, reducing Optical Transport Units (OTUs) and helping a cloud or hyper-scale
data center network to adapt to growing high-bandwidth services

Hardware-level Redundancy,
Ensuring Nonstop Services and Data
Center Network Stability

Innovative Technology Design and Highly Efficient Heat Dissipation

MACsec Data Encryption and Transmission,
Effectively Protecting Service Data Security

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time,
making network management more efficient and accurate.

Education

5-Star Hotel Solution

RG-N18010-XH – Next Generation Data Center Network High-Density Centralized Modular Core Switch with 100GE/400GE Line Cards and Eight Service Slots

100GE and 400GE line cards, and up to 288 x 400GE and 1152 x 100GE line-rate ports

Communication at the maximum distance of 120 km and easy DCI

Hardware-level redundancy, ensuring nonstop services and data center network stability

MACsec data encryption and transmission, effectively protecting service data security

Innovative technology design and efficient heat dissipation, with more than 50,000 kWh saved per device each year

Telemetry-based network monitoring and automated O&M, making management simple and efficient

Data Center 400GE Modular Core SwitchRG-N18010-XH

Innovative Architecture Design,Achieving Highly Efficient Data Transmission

Zero Midplane

Clos Architecture

Communication at the Maximum Distance of 120 KM and Easy DCI

400GE ZR/ZR+ optical modules are used for interconnection, reducing Optical Transport Units (OTUs) and helping a cloud or hyper-scale data center network to adapt to growing high-bandwidth services

Hardware-level Redundancy,Ensuring Nonstop Services and Data Center Network Stability

Innovative Technology Design and Highly Efficient Heat Dissipation

MACsec Data Encryption and Transmission,Effectively Protecting Service Data Security

Telemetry-based Network Monitoring and Automated O&M,Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time,making network management more efficient and accurate.

Data Center 400GE Modular
Core Switch
RG-N18010-XH

Innovative Architecture Design,
Achieving Highly Efficient Data Transmission

400GE ZR/ZR+ optical modules are used for interconnection, reducing Optical Transport Units (OTUs) and helping a cloud or hyper-scale
data center network to adapt to growing high-bandwidth services

Hardware-level Redundancy,
Ensuring Nonstop Services and Data
Center Network Stability

MACsec Data Encryption and Transmission,
Effectively Protecting Service Data Security

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time,
making network management more efficient and accurate.