Picture

RG-CS86-24XMG4XS4VS-UPD 24-Port Multi-GE Switch with Cloud Management, Full 1GE/2.5GE/5GE/10GE Access with PoE++

Delivering fast hardware processing and good operation experience, and satisfying requirements on high speed, security, and intelligence for enterprise campus networks.

Models

RG-CS86-12XMG4VS-UP

12 x 10GE RJ45 ports, 4 x 25GE SFP28 ports

RG-CS86-24MG4VS-UP

24 x 5GE RJ45 ports, 4 x 25GE SFP28 ports

RG-CS86-24XMG4XS4VS-UPD

24 x 10GE RJ45 ports, 4 x 10GE SFP+ ports, 4 x 25GE SFP28 ports

RG-CS86-48MG4VS2QXS-UPD

48 x 5GE RJ45 ports, 4 x 25GE SFP28 ports, 2 x 40GE QSFP+ ports

Series

RG-CS86 Series Multi-GE Switch

Sales Enquiry

Highlight Features

24 x 100/1000/2.5G/5G/10GBASE-T ports for access, 4 x 1GE/10GE SFP+ ports and 4 x 10GE/25GE SFP28 ports for uplink, meeting high-bandwidth campus network demands
Hardware-level multi-protection, ensuring service continuity
VSU, realizing flexible networking and high performance
Network security policies and real-time monitoring, enhancing network robustness
Intelligent speed regulation and auto sleeping, reducing energy consumption and noise
Diverse network management modes, enabling simple maintenance

Features
Specifications
Resources
Order Information
Perguntas frequentes

Sales Enquiry

Features

RG-CS86-24XMG4XS4VS-UPD, 10GE Multi-rate Access Switch

4 x 10GE SFP+ ports and 4 x 25GE SFP28 ports for uplink, enabling flexible networking High-power PoE++, offering up to 90 W output and adapting to services in Wi-Fi 6E and Wi-Fi 7 eras

Hardware Redundancy, Guaranteed Service Continuity and Network Connectivity

Hardware-Level Boot Redundancy

Optical Port Fault Isolation

Hot-Swappable Power Modules + Intelligent Fan Modules

Two Flash chips are used to store the system Boot program for hardware-level Boot redundancy, avoiding device failure caused by a failed Flash chip.

The innovative isolated chip design ensures that short-circuit current cannot reach the power supply chip directly. Failure of one optical module will not affect the normal operation of other optical ports, thus effectively ensuring service stability.

Power modules can be replaced without affecting device operation.
Intelligent fan speed regulation is supported for efficient cooling, providing dual protection for the network.

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

Connected by an aggregate link, the VSU virtual system and peripherals switch links in milliseconds to ensure service continuity in case of a failure.

VSU virtualization technology is supported to increase bandwidth through link aggregation, which greatly improves forwarding capabilities of the switch.

Multiple physical switches can be virtualized into one logical unit to simplify network configuration and architecture, eliminating loops, and improving reliability.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

Intelligent Speed Regulation and Auto Sleeping, Reducing Energy Consumption and Noise

Intelligent fan speed regulation based on monitored component temperatures, saving energy, Auto service port sleeping, reducing device power consumption

Ruijie Cloud and Diverse Management Modes Make Your Business Easy

Ruijie Cloud

Flexible management modes

SON, zero touch provisioning to Cloud

Configure VLANs on Ruijie Cloud APP

Monitor switch statistics at anytime anywhere

Ease of maintenance, saving onsite labor and cost

Specifications

Hardware Specifications

Port Specifications	RG-CS86-24MG4VS-UP	RG-CS86-12XMG4VS-UP	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-48MG4VS2QXS-UPD
Fixed service port	24 x 100/1000/2.5G/5GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 10GE/25GE SFP28 ports	12 x 100/1000/2.5G/5G/10GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 10GE/25GE SFP28 ports	24 x 100/1000/2.5G/5G/10GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 1GE/10GE SFP+ ports 4 x 10GE/25GE SFP28 ports	48 x 100/1000/2.5G/5GBASE-T ports ● Ports 1 to 48 support PoE/PoE+ ● Ports 1 to 24 support PoE++ 4 x 10GE/25GE SFP28 ports 2 x 40GE QSFP+ ports
Module slot	/	/	2 x power module slots 3 x fan module slots
Power module	/	/	RG-PA600I-P-F RG-PA1000I-P-F
Fan module	/	/	M2SFAN I-F (pre-installed 3)
Fixed management port	1 x RJ45 console port 1 x RJ45 MGMT port
USB	1 x USB port

System Specifications	RG-CS86-24MG4VS-UP	RG-CS86-12XMG4VS-UP	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-48MG4VS2QXS-UPD
Packet forwarding rate	327 Mpps	327 Mpps	565 Mpps	625 Mpps
Switching capacity	440 Gbps	440 Gbps	760 Gbps	840 Gbps
CPU	Dual-core CPU, with a clock speed up to 1.25 GHz
BootROM	16 MB (storing boot software for 1+1 boot redundancy)
Flash memory	1 GB (storing boot software for 1+1 boot redundancy)
Memory	1 GB	1 GB	1 GB	2 GB
Switch buffer	4 MB
MAC address table size	32,768
ARP table size	16,000
Number of IPv4 unicast routes	16,000
Number of IPv4 multicast routes	4,000
Number of IPv6 unicast routes	16,000
Number of IPv6 multicast routes	2,000
Number of ACEs	Ingress: 2,500 Egress:1,000
Number of VSU members	2

Dimensions and Weight	RG-CS86-24MG4VS-UP	RG-CS86-12XMG4VS-UP	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-48MG4VS2QXS-UPD
Unit dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)
Shipping dimensions (W x D x H)	568 mm x 366 mm x 226 mm (22.36 in. x 14.41 in. x 8.90 in.)		563 mm x 563 mm x 210mm (22.17 in. x 22.17 in. x 8.27 in.)
Rack height	1 RU
Unit weight	3.65 kg (8.82 lbs)		6.11 kg (13.47 lbs)
Shipping weight	5.37 kg (11.84 lbs)		8.12 kg (17.90 lbs)	8.42 kg (18.56 lbs)

Power Supply and Consumption	RG-CS86-24MG4VS-UP	RG-CS86-12XMG4VS-UP
Power supply	1 x fixed power supply	1 x fixed power supply
Power input	AC input ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 6 A
Maximum output power	Built-in power supply: 460 W
Maximum power consumption	90 W (without PoE) 460 W (full PoE load)
PoE port	Ports 1 to 24 support PoE/PoE+ and HPoE power supply (IEEE 802.3af/at and 802.3bt).	Ports 1 to 12 support PoE/PoE+ and HPoE power supply (IEEE 802.3af/at and 802.3bt).
PoE power cable pairs	Four pairs (1-2, 3-6, 4-5, and 7-8 pairs)
PoE output power	Each PoE port provides up to 90 W of power The maximum power is 370 W

Power Supply and Consumption	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-48MG4VS2QXS-UPD
Power supply	2 x pluggable power modules
Power module redundancy	1+1 power redundancy
Power module hot swapping	Supported
Power input	RG-PA600I-P-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A RG-PA1000I-P-F (AC input 1): ● Rated input voltage: 100 V AC to 130 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz ● Maximum input current: 12 A RG-PA1000I-P-F (AC input 2): ● Rated input voltage: 200 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A
Maximum output power	RG-PA600I-P-F: 600 W RG-PA1000I-P-F: ● 100 V AC to 130 V AC: 930 W ● 200 V AC to 240 V AC: 1000 W
Maximum power consumption	150 W (without PoE) 1,800 W (full PoE load)	200 W (without PoE) 1,800 W (full PoE load)
PoE port	Ports 1 to 24 support PoE/PoE+ and HPoE power supply (IEEE 802.3af/at and 802.3bt).	Ports 1 to 24 support HPoE power supply (IEEE 802.3bt) Ports 1 to 48 support PoE/PoE+ power supply (IEEE 802.3af/at)
PoE power cable pairs	Four pairs (1-2, 3-6, 4-5, and 7-8 pairs)
PoE output power	Each PoE port provides up to 90 W of power ● 1 x RG-PA600I-P-F：450 W ● 1 x RG-PA1000I-P-F: 760 W (100 V AC to 130 V AC) ● 1 x RG-PA1000I-P-F: 850 W (200 V AC to 240 V AC) ● 2 x RG-PA600I-P-F：930 W ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1200 W (100 V AC to 130 V AC) ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1290 W (200 V AC to 240 V AC) ● 2 x RG-PA1000I-P-F: 1470 W (100 V AC to 130 V AC) ● 2 x RG-PA1000I-P-F: 1650 W (200 V AC to 240 V AC)	Each port of ports 1 to 24 provides up to 90 W of power Each port of ports 25 to 48 provides up to 30 W of power ● 1 x RG-PA600I-P-F：400 W ● 1 x RG-PA1000I-P-F: 710 W (100 V AC to 130 V AC) ● 1 x RG-PA1000I-P-F: 800 W (200 V AC to 240 V AC) ● 2 x RG-PA600I-P-F：880 W ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1150 W (100 V AC to 130 V AC) ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1240 W (200 V AC to 240 V AC) ● 2 x RG-PA1000I-P-F: 1420 W (100 V AC to 130 V AC) ● 2 x RG-PA1000I-P-F: 1600 W (200 V AC to 240 V AC)

Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.

Environment and Reliability	RG-CS86-24MG4VS-UP	RG-CS86-12XMG4VS-UP	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-48MG4VS2QXS-UPD
Temperature	Operating temperature: 0°C to 45°C (32°F to 113°F) Storage temperature: –40°C to +70°C (–40°F to +158°F)
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Altitude	Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.)
Mean time between failure (MTBF)	194,297 hours (about 22 years)	194,297 hours (about 22 years)	194,297 hours (about 22 years)	237,221 hours (about 27 years)
Fan	2 x fixed fan modules		3 x pluggable fan modules
Fan redundancy	Not supported		2+1 redundancy
Fan module hot swapping	/		Supported
Heat dissipation	Fan cooling, front-to-right and left-to-right airflow		Fan cooling, front-to-rear and left-to-rear airflow
Acoustic noise	27°C (80.6°F): 40 dB 45°C (113°F): 78 dB	27°C (80.6°F): 40 dB 45°C (113°F): 78 dB	27°C (80.6°F): 60 dB 45°C (113°F): 78 dB	27°C (80.6°F): 60 dB 45°C (113°F): 78 dB
Power module hot swapping	/	/	Supported	Supported
Fan module hot swapping	/	/	Supported	Supported
USB hot swapping	Supported	Supported	Supported	Supported
Cable hot swapping	Supported	Supported	Supported	Supported
Power supply monitoring	Monitoring of power supply model and status Power supply failure alarming
Fan monitoring	Fan speed adjustment: 3 levels Fan failure alarming
Temperature monitoring	Temperature alarming
ESD	ESD contact discharge/air discharge: 6 kV/8 kV ESD immunity contact discharge/air discharge: 8 kV/15 kV
Surge protection	MGMT port: 4 kV Service port: 4 kV Power port: common mode 6 kV, differential mode 6 kV
Conformal coating	Conformal coating supported (key components only)

Certifications and Regulatory Compliance

RG-CS86-24MG4VS-UP

RG-CS86-12XMG4VS-UP

RG-CS86-24XMG4XS4VS-UPD

RG-CS86-48MG4VS2QXS-UPD

Safety regulation

IEC 62368-1

EMC regulation

EN 300386, EN 55032 Class A, EN 55035,

EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3,

EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

Software Specifications

Software Specifications	RG-CS86-24MG4VS-UP	RG-CS86-12XMG4VS-UP	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-48MG4VS2QXS-UPD
Ethernet switching	Jumbo frame (maximum length: 9216 bytes)
	IEEE 802.1Q (supporting 4K VLANs)
	Voice VLAN
	Super VLAN, Private VLAN
	MAC VLAN, Port based VLAN, Protocol based VLAN, IP-Subnet based VLAN
	GVRP
	Basic QinQ Flexible QinQ
	STP, RSTP, and MSTP
	ERPS (G.8032)
	LLDP/LLDP-MED
	LACP (IEEE 802.3ad)
IP service	ARP
	DHCP client, DHCP relay, and DHCP server
	DHCP snooping
	DNS
	DHCPv6 client and DHCPv6 relay
	DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
IP Routing	Static routing
	RIP and RIPng
	OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6
	BGP4 and BGP4+
	IPv4 and IPv6 PBR
	ECMP
Multicast	IGMP v1/v2/v3, and IGMP proxy
	IGMP v1/v2/v3 snooping
	PIM-DM, PIM-SM, and PIM-SSM
	MSDP
	MLD v1/v2
	MLD snooping v1/v2
	PIM-SMv6 and PIM-SSM v6
ACL and QoS	Standard IP ACLs Extended IP ACLs Extended MAC ACLs Time-based ACLs Expert-level ACLs ACL80 IPv6 ACL
	Port traffic rate limiting
	Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	802.1p/DSCP/ToS traffic classification Eight priority queues per port
Security	Multiple AAA modes
	RADIUS and TACAS+
	Port-based and MAC-based 802.1x authentication
	Web authentication
	HTTPS
	SSHv1, SSHv2
	Global IP-MAC binding
	IP source guard
	SAVI
	CPP and NFPP
	Strict and loose RPF uRPF ignoring default routes
Reliability	REUP, RLDP, DLDP
	IPv4 VRRP v2/v3 and IPv6 VRRP
	BFD
	GR for RIP, OSPF, BGP
	1+1 power redundancy
	Hot swapping of power and fan modules
Device virtualization	Virtual Switching Unit (VSU)
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFLOW
	NTP and SNTP
	FTP and TFTP
	SNMP v1/v2/v3
	RMON (1, 2, 3, 9)
	NETCONF
	CWMP (TR-069) standard protocol
	gRPC
	Cloud and SON
PoE	IEEE 802.3af, 802.3at and 802.3bt Uninterruptible power supply upon hot start Port priority

Resources All Resources

Software and Configuration

Release Note

Order Information

Switches and Power Modules

Model	Description
RG-CS86-24MG4VS-UP	24 x 100/1000/2.5G/5GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 10GE/25GE SFP28 ports fixed AC power supply and fan
RG-CS86-12XMG4VS-UP	12 x 100/1000/2.5G/5G/10GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 10GE/25GE SFP28 ports fixed AC power supply and fan
RG-CS86-24XMG4XS4VS-UPD	24 x 100/1000/2.5G/5G/10GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 1GE/10GE SFP+ ports 4 x 10GE/25GE SFP28 ports 2 modular power supply slots (at least one RG-PA600I-P-F or RG-PA1000I-P-F power module needed,no power module in default),3 modular fan slots (3 fan modules are equipped by default)
RG-CS86-48MG4VS2QXS-UPD	48 x 100/1000/2.5G/5GBASE-T ports, supporting PoE/PoE+/PoE++(25-48 ports only support PoE/PoE+) 4 x 10GE/25GE SFP28 + 2 x 40GE QSFP+ ports 2 modular power supply slots (at least one RG-PA600I-P-F/ RG-PA1000I-P-F power module needed,no power module in default),3 modular fan slots (3 fan modules are equipped by default)
RG-PA600I-P-F	600 W AC power module
RG-PA1000I-P-F	1000 W AC power module

Note:

4 x10GE/25GE SFP28 ports support 10GE SFP+ transceivers and 25GE SFP28 transceivers. All 10GE/25GE SFP28 ports must work at the same rate, either 25G or 10G.
4 x 1GE/10GE SFP+ ports support 1GE SFP transceiversand 10GE SFP+ transceivers.
2 x 40GE QSFP+ ports support 40GE QSFP+ transceivers. The port can work in 4 x 10GE mode.

Optical Transceivers and Cables

1GE

Model	Description
Mini-GBIC-GT	1000BASE-X to 1000BASE-T, copper SFP transceiver, RJ45, 100 m over Cat 5e/6/6a The port needs to be configured with auto-negotiation
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, 850 nm, Duplex LC, 500 m over MMF
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, 1310 nm, Duplex LC, 40 km over SMF
MINI-GBIC-ZX80-SM1550	1000BASE-ZX, SFP transceiver, 1550 nm, Duplex LC, 80 km over SMF
GE-SFP-LX20-SM1310-BIDI	1000BASE-LX, SFP transceiver, Tx1310/Rx1550, BiDi LC, 20 km over SMF
GE-SFP-LX20-SM1550-BIDI	1000BASE-LX, SFP transceiver, Tx1550/Rx1310, BiDi LC, 20 km over SMF
GE-SFP-LH40-SM1310-BIDI	1000BASE-LH, SFP transceiver, Tx1310/Rx1550, BiDi LC, 40 km over SMF
GE-SFP-LH40-SM1550-BIDI	1000BASE-LH, SFP transceiver, Tx1550/Rx1310, BiDi LC, 40 km over SMF

Note: BiDi transceivers must be used in pairs. If one end uses GE-SFP-LX20-SM1310-BIDI, the other end must use GE-SFP-LX20-SM1550-BIDI.

10GE

Model	Description
XG-SFP-SR-MM850	10GBASE-SR, SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF
XG-SFP-LR-SM1310	10GBASE-LR, SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF
XG-SFP-ER-SM1550	10GBASE-ER, SFP+ transceiver, 1550nm, Duplex LC, 40 km over SMF
XG-SFP-AOC1M	10GBASE, SFP+ active optical cable (AOC), 1 m, including one cable and two optical transceivers
XG-SFP-AOC3M	10GBASE, SFP+ active optical cable (AOC), 3 m, including one cable and two optical transceivers
XG-SFP-AOC5M	10GBASE, SFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

25GE

Model	Description
VG-SFP-SR-MM850	25GBASE-SR, SFP28 transceiver, 850 nm, Duplex LC, 100 m over OM4 MMF, 70 m over OM3 MMF
VG-SFP-LR-SM1310	25GBASE-LR, SFP28 transceiver, 1310 nm, Duplex LC, 10 km over SMF
VG-SFP-AOC7M	25GBASE, SFP28 active optical cable (AOC), 7 m, including one cable and two optical transceivers

40GE

Model	Description
40G-QSFP-SR-MM850	40GBASE-SR, QSFP+ transceiver, 850 nm, MPO 1 x 12, 150 m over OM4 MMF, 100 m over OM3 MMF
40G-QSFP-LSR-MM850	40GBASE-LSR, QSFP+ transceiver, 850 nm, MPO 1 x 12, 400 m over OM4 MMF, 300 m over OM3 MMF
40G-QSFP-LR4-SM1310	40GBASE-LR4, QSFP+ transceiver, 1310 nm, Duplex LC, 10 km over SMF
40G-QSFP-iLR4-SM1310	40GBASE-iLR4, QSFP+ transceiver, 1310 nm, Duplex LC, 2 km over SMF
40G-QSFP-LX4-SM1310	40GBASE-LX4, QSFP+ transceiver, 1310 nm, Duplex LC, 150 m over OM3/OM4 MMF, 2 km over SMF
40G-AOC-5M	40GBASE, QSFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers
40G-AOC-30M	40GBASE, QSFP+ active optical cable (AOC), 30 m, including one cable and two optical transceivers

Perguntas frequentes Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution