Software Specifications |
RG-S2910-24GT4XS-E |
RG-S2910-48GT4XS-E |
VLAN |
4K 802.1q VLANs Port-based VLAN MAC-based VLAN Protocol-based VLAN Private VLAN Voice VLAN QinQ IP subnet-based VLAN GVRP Guest VLAN |
QinQ |
Basic QinQ Flexible QinQ N:1 VLAN switching 1:1 VLAN switching |
Link Aggregation |
AP, LACP (maximum 8 ports can be aggregated), Cross devices AP, Flow balance |
ACL |
Standard/Extended/Expert ACL Extended MAC ACL ACL 80 IPv6 ACL ACL logging ACL counter ACL remark Global ACL ACL redirect Time-based ACL Router ACL VLAN ACL Port-Based ACL |
QoS |
802.1p/DSCP/TOS traffic classification; Multiple queue scheduling mechanisms, such as SP, WRR, DRR, SP+WFQ, SP+WRR, SP+DRR Input / output port-based speed limit Port-based traffic recognition Layer 4 prioritization based on TCP/UDP port numbers Each port supports 8 queue priorities Flow-based rate limiting with the minimum granularity of 8Kbps Dynamic QoS |
Mirroring |
Over devices mirroring VLAN-based mirroring VLAN-filtering mirroring AP-port mirroring, RSPAN ERSPAN Note: RG-S2910-10GT2SFP-P-E supports Many-to-one mirroring, One-to-many mirroring, Flow-based mirroring |
Spanning Tree Protocols |
IEEE802.1d STP, IEEE802.1w RSTP, Standard 802.1s MSTP, Port fast, BPDU filter, BPDU guard, TC guard, TC protection, ROOT guard, Spanning Tree Root Guard (STRG) |
DHCP |
DHCP server DHCP client DHCP snooping DHCP relay IPv6 DHCP snooping IPv6 DHCP client IPv6 DHCP relay DHCP Snooping Option 82 |
Multiple Spanning Tree Protocol (MSTP) Instances |
64 |
Layer 2 protocols |
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.1x, IEEE802.3ab, IEEE802.1Q (GVRP), IEEE802.1d, IEEE802.1w, IEEE802.1s |
Maximum Aggregation Port (AP) |
128 |
SDN |
OpenFlow 1.0 & 1.3 |
VSU (Virtual Switch Unit) |
Support (up to 9 stack members to ensure the effectiveness of the use, 4 members are recommended), Local and distant stacking, Cross-chassis link aggregation in the stack, Stacking via 10G Ethernet ports # All models support the features above except RG-S2910-10GT2SFP-P-E |
Zero Configuration |
CWMP(TR069) |
Energy Efficient Ethernet (EEE) |
IEEE 802.3az-compliant EEE: When EEE is enabled, power consumption of interfaces is significantly reduced. |
L2 Features |
MAC, EEE, ARP, VLAN, Basic QinQ, Felix QinQ, Link aggregation, Mirroring, STP, RSTP, MSTP, Broadcast/ Multicast/Unknown unicast storm control, IGMP v1/v2/v3 snooping, IPv6 MLD Snooping v1/v2, IGMP SGVL/ IVGL, IGMP querier, IGMP filter, IGMP fast leave, DHCP, Jumbo frame, RLDP, LLDP, REUP, G.8032 ERPS, Layer 2 protocol tunnel |
IP routing |
IPv4/ IPv6 static route RIP, RIPng, OSPFv2, and OSPFv3 Routing policy |
IPv6 Basic protocols |
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping and IPv6 Tracert |
Other Protocols |
FTP, TFTP, DNS client, DNS static |
IPv4 Features |
Ping, Traceroute |
IPv6 Features |
ICMPv6, IPv6 Ping, IPv6 Tracert, Manually configure local address, Automatically create local address |
VSU features |
VSU (virtualization technology for virtualizing multiple devices into 1); RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol) |
Management features |
SNMPv1/v2c/v3 CLI (Telnet / Console) RMON (1, 2, 3, 9) SSH Syslog/Debug NTP/SNTP, FTP, TFTP Web sFLOW HTTP or HTTPS Note: RG-S2910-10GT2SFP-P-E supports SNMPv2c, CLI (Telnet / Console), Syslog, RMON (1, 2, 3, 9), Web |
EEE Format |
Support IEEE 802.3az standard |
Hot Patch |
Support |